An Amateur Radio Blog by DX Engineering 
Question: What’s an easy and inexpensive way of improving my mobile radio receiver performance? Most mobile installations, for safety reasons, position the radio out of the way, under the dashboard, on […]
Are you ready for Field Day? DX Engineering can help you stock up on supplies and gear to ensure your club’s event goes off without a hitch. Take some time […]
No two Amateur Radio stations are the same, so buying an “off the shelf” coaxial cable assembly usually means dealing with several feet of extra, unwanted cable. Not only does […]
Your SWR (standing wave ratio) meter looks at forward (used) power and reflected (wasted) power as a measure of antenna system efficiency. This basic measurement has been used for decades […]
Rule 1: Coaxial connectors are not pipes. RF connector gender is determined by center pin, NOT by their threads. Coaxial cable connectors have specific designations and their gender is determined by […]
Tim, W3YQ, and Tom, A8AZ, demonstrate the proper way to install Cable Grips on Phillystran Guy Line. Once you see how this done properly, it makes the task much easier to […]
Have you checked the ground connections on your station? Inside and outside as well. Make sure everything is still solidly connected. Double-check anything outside that a critter could chew, step […]